iBELL Power Saw Machines Price List
-
₹3,254 ₹5,00035% Off- Rated voltage : 230V~50Hz
- Rated Input Power : 700 W; Rated no load speed : 500-3000 rpm
- Cutting capacity : 65 mm
- Weight : 2.52 Kg
- Protection class : Class II
-
₹7,393 ₹12,00038% Off- 58CC
- 10000 RPM
- 18" GUIDE BAR
-
We recommend checking the price history at PriceBefore before purchasing power saw machines.
-
₹8,277 ₹10,80023% Off
- Rated voltage : 230V~50Hz, Rated Input Power : 2400 W,
- Rated no load speed : 3900 rpm
- Cutting disc diameter : 355 mm
- Weight : 16.8 Kg
- Protection class : Class II
-
₹6,928 ₹8,80021% Off
- PRODUCT SPECIFICATIONS-Rated Power : 2.5KW/3.3HP; Idle Speed : 3000±200 rpm; Tank Capacity : 560 ml; Displacement : 58cc; Weight : 6.5 Kg
-
Best Selling Power Saw Machines by Price
-
₹7,254 ₹8,80018% Off
- PRODUCT SPECIFICATIONS-Rated Power : 2.5KW/3.3HP; Idle Speed : 3000±200 rpm; Tank Capacity : 560 ml; Displacement : 58cc; Weight : 6.5 Kg
-
₹12,786 ₹16,50023% Off
- 56cc 2-Stroke Engine
- 11000 rpm
- 550 ml Tank
- 260 ml Tank
- 18 inch Guide Bar
- 3.2 hp Output Power
- 6.33 kg Light Weight
-
₹4,404 ₹4,8008% Off
- 220V, 50Hz
- 1200 RPM
- Guide Length : 405MM
- 1800 W
-
₹4,184 ₹5,00016% Off
- [SPECIFICATIONS] Rated voltage : 230V~50Hz; Rated Input Power : 1400 W; Rated no load speed : 4800 rpm; Cutting wheel diameter : 185mm~7.2”; Maximum Cutting Depth : 58 mm; Weight : 5.3 Kg
- [GENERAL PURPOSE] CS85-71 is a circular power-saw using a toothed blade to cut materials using a rotary motion spinning around an arbor. This can be used for cutting materials such as wood, masonry, plastic, sometimes light metal.
- [EFFICIENT & PRECISE CUTS] This is a powerful and compact tool for cutting that works quite precisely and fast. The cutting wheel(blade) has a position that gives the best reach to the workpiece and improves the efficiency of cutting. The blade is spindle mounted so we can fix and remove it quickly.
- [DESIGN] The design allows good control over the angle and the depth of reach at all times. We can make a clean cut so that the end product needs a lesser amount of finishing.
- [BIVELLING /ANGLE CUT] The Saw can be adjusted to cut at angles between 0° and 45°. Tilt the body of the tool until the required angle (0°-45°)is reached using the bevel scale as a guide. Pre-set stops are available at 0°, 15° ,30° & 45° for quick, accurate bevel settings.
- [RIP FENCE] The Rip fence (Straight edge guide) allows sawing parallel to an edge at a max distance of about 15 cm. Use the guide when making long or wide rip or cross cuts.
